Product Info Guide     MSDS     MiraPedia Entry      View as PDF     Request a Sample      Order Online

Home Page      Search All Mirachem Sites        Contact Us        Site Map    Parts Washer Service Programs

 The Product
Mirachem 500 is a water-based cleaner/degreaser that has been formulated to safely remove oil, grease, carbon and other organic deposits from all types of surfaces while meeting federal, state and local air pollution and waste water regulations.  Mirachem 500 Cleaner / Degreaser is an excellent alternative to hazardous solvents and chemicals.

Mirachem 500 Cleaner / Degreaser is:

• Is certified as a clean air product by the South Coast Air Quality Management District.
• Is NSF Certified for use in USDA federally inspected meat and poultry plants.
• Contains no total toxic organic (TTO) compounds, which simplifies industrial waste water permitting and toxic organic management plans.
• Contains no ingredients subject to SARA Title III Section 313 part 372 reporting requirements.
• Has an extremely low composite vapor pressure.

• Contains NO caustics, alkalines, solvents
• Biodegradable
• Non-Corrosive to Most Surfaces
• Non-Fuming
• Water Soluble
• Non-Flammable
• Non-Combustible

Please note that some of these videos may take time to load. Please be patient.  Click Here if you are having video difficulty. 

Application Techniques:

• May be applied by spraying, dipping, steam cleaning, pressure washing, ultrasonic cleaning, parts washing, submerging, soaking, brushing, sponging or wiping.

• Reapply as need to keep the surface wet

• Allow sufficient time for the product to loosen or dissolve deposits

• Rinse or flush with water

• Hot water or high pressure rinse will provide optimum results

• Where water rinsing is not possible, wipe treated surface with wet cloth or sponge taking care to frequently rinse.

• Reapply if needed or use fiber pad to speed removal of loosened deposits

• When cleaning upholstery, fabrics or carpet, apply by spraying and lightly rub soiled area with towel or soft brush.  Follow by wiping area with clean wet cloth or spray rinse with water and towel dry.

• Mirachem 500 Cleaner / Degreaser will perform successfully in all environments, warmer temperature will improve cleaning times and product efficiency.

• Mirachem 500 Cleaner / Degreaser may be used on nearly any surface that is compatible with water rinsing.  We suggest that the user test the product before using on finished surfaces such as paint, varnish, plastic, etc.  Since these surfaces are composed of hydrocarbon base materials, the product may affect poorly finished or sealed surfaces.

• For more detailed application instructions, read our Product Information Guide

• Can be diluted with ordinary tap water or salt water.
• Dilution ratios will vary greatly depending on the amount of build up , temperature and speed required to complete the job.
• Tough Tasks:  1:1 to 3:1 - Degreasing engines, parts cleaning tanks, heavy hydrocarbon deposits on floors, etc.
• Moderate Tasks:  3:1 to 10:1 - Routine equipment and facility maintenance
• Assisted Cleaning: 20:1 or Higher - Pressure Washers or Steam Cleaners
• For more specific dilution ratios, see our Product Information Guide
• Meets South Coast Air Quality Management District regulations at 2 to 1 dilution ratio.

Still can't find what you need? 
Email or call us at 800-847-3527 from 9am EST to 3pm PST

Would you like a sample?  
Visit our Sample Page to order a sample and see for yourself the superior cleaning performance of Mirachem products.

Are you interested in Parts Washer Service using Mirachem 500?  
Visit our Parts Washer Service Page to request information on service in your area.

Are you ready to order? 
Buy online in our e-commerce area, or contact us for more ordering options.