Mirachem 250 Rust & Scale Remover

The Product
Mirachem 250 Rust & Scale Remover utilizes an advanced chemical technology that removes rust, corrosion, oxidation, heat and water scale from metal and concrete surfaces. There are other rust and scale removers on the market, but only Mirachem 250 eliminates the harmful risks, dangers and pollution associated with highly alkaline, caustic, corrosive and hazardous products. Mirachem 250 does not contain hydrochloric, hydrofluoric, nitric or sulfuric acids.

Mirachem 250 is safe!

Eliminates the harmful risks, dangers and pollution associated with highly alkaline, caustic, corrosive and hazardous products.
Biodegradable
Non-Corrosive to Most Surfaces
Non-Fuming
Non-Flammable & Non-Combustible
Certified Clean Air Solvent by the South Coast Air Quality Management District
Unlike most rust and corrosion removers, Mirachem 250 does not attack chrome plating, brass, rubber, plastic, glass or stainless steel. Its effect on mild steel is minimal.

Use Mirachem 250 for:

Dip Tank Derusting & Descaling
Removing Stains from Concrete
Water Scale Deposits
Cleaning Epoxy or Painted Surfaces
Aircraft Corrosion Removal
Lime and Soda Ash Deposits
Paint Primer for Metal Surfaces

Use Mirachem 250 on:

Machine Tools and Equipment
Boilers and Heat Exchangers
Tools, Trowels and Concrete Forms
Storage Tanks
Automotive Parts and Bodies
Boat Hulls, Decks and Hardware
Air Conditioning Systems
Evaporative Coolers
Farm and Dairy Equipment
Power Transformers

Directions for Use:

If the surface to be cleaned is greasy or oily, first clean the surface with Mirachem 500

Apply by spraying, wiping, dipping, soaking or brushing

Reapply as need to keep the surface wet

Allow sufficient time for the product to loosen or dissolve deposits

Rinse with a strong water flow or pressure washer

Reapply if needed or use fiber pad to speed removal of loosened deposits

In a dip tank or ultrasonic, product can be used at room temperature or heated (120 to 150^oF)

Heat increases the penetration and reduces soak time necessary to remove deposits

Reapply and let dry for use as a paint primer on metal surfaces

NOTE: Mirachem 250 may react with zinc (galvanized), magnesium, tempered carbon steel and some aluminum alloys depending upon temperature and length of exposure. On these surfaces, limit exposure time necessary to remove the rust or corrosion and then water rinse.

Dilution Ratios:

Can be used full strength for tough tasks
Dilute up to 3 parts water to 1 part product, depending on severity of rust, corrosion or scale
Meets South Coast Air Quality Management District regulations at full strength

For more detailed information and answers to frequently asked questions on Mirachem 250 Rust & Scale Remover, take a moment to read:

Still can't find what you need?
Email or call us at 800-847-3527 from 9am EST to 3pm PST

Would you like a sample?
Visit our Sample Page to order a sample and see for yourself the superior cleaning performance of Mirachem products.

Are you ready to order?
Buy online in our e-commerce area, or contact us for more ordering options.

Product Info Guide MSDS MiraPedia Entry View as PDF Request a Sample Order Online

Home Page Search All Mirachem Sites Contact Us Site Map

090607