Material Safety Data Sheet   
Mirachem® Silicone Antifoam

(Formulation No. 2300)

Section I - Chemical Product and Company Identification

Manufacturer Name:    Mirachem Corporation
P.O. Box 14059

Phoenix, Arizona  85063-4059 

Emergency Phone:                1-(800) 847-3527
 

Date Prepared:        2/26/96
Revision Date:       8/19/02

Section II - Composition/Information on Ingredients

Hazardous Component (CAS #)

OSHA PEL

ACGIH TLV

Other Limits

% (Optional)

None        

 

Section III - Physical/Chemical Characteristics

Boiling Point:

212ºF

.9933

NA

% Volatiles:

  90%

pH:

8.0 - 8.5

Vapor Density (AIR =1):

>1

Evaporation Rate (Butyl Acetate = 1):

NA

Solubility in Water:             

Dispersible

Melting Point:

N/A

Appearance and Odor: 

Opaque thick white liquid with very light odor

N/A = Not Applicable                N.E. = Not Established

 

Section IV - Fire and Explosion Hazard

Flash Point (Method Used):

>212ºF

Explosive Limits:

N/A

Extinguishing Media:

Carbon dioxide, Dry chemical, Water spray (fog)

Special Fire Fighting Procedures:

none

Unusual Fire Fighting and Explosion Hazards:

none

 

Section V - Reactivity

Stability:    Unstable             X Stable
Incompatibility (Materials to Avoid): None
Hazardous Decomposition or By-products: Carbon Monoxide, Carbon Dioxide, and oxides of silicone, upon thermal decomposition
Hazardous Polymerization:    May Occur           X Will Not Occur
   

Section VI - Health Hazard Data

     Eye Contact: May cause mild temporary irritation.
     Skin Contact: Not expected to cause irritation.
     Inhalation: No adverse effects expected.
     Ingestion: No adverse health effects are anticipated to occur as a result of acute ingestion.  Chronic effects are not known.
     Carcinogenicity: None of the components in this material are listed by IARC, NTP, OSHA, or ACGIH as a carcinogen.
     Signs/Symptoms of Overexposure: Prolonged contact may cause skin and eye irritation.
     Medical Conditions Generally Aggravated by Exposure: None known.
 

Section VII - Emergency and First Aid Procedures

Eyes: Immediately flush with large amounts of clean water for 15 minutes.  Consult physician if necessary.
Skin: Wash with soap and water.  Remove contaminated clothing and launder before use.
Ingestion: Dilute by drinking at least 2 glasses of water.
Inhalation: No adverse effects anticipated.
 

 Section VIII - Precautions for Safe Handling and Use

In Case of Spill: Soak up with absorbent material and shovel into waste containers.  Wash area with soap and water to eliminate slip hazard.
Waste Disposal: Deposit contaiminated absorbent in landfill in accordance with Federal, State and local regulations.
Handling & Storage Precautions: Protect from freezing.
Other Precautions: Keep container tightly closed.  Keep out of reach of children.
 

Section X - Control Measures

Respiratory Protection: No respiratory protection is necessary.
Ventilation: Good ventilation is sufficient.
Protective Clothing: When prolonged skin contact is expected, wear protective gloves.  Chemical goggles are recommended.
Eye Protection: Wear safety glasses.
Work/Hygienic Practices: Use good personal hygiene practices, wash hands before eating, drinking, smoking, or using toilet facilities.
 
 
 
L10 Web Stats Reporter 3.15 LevelTen Hit Counter - Free PHP Web Analytics Script
LevelTen dallas web development firm - website design, flash, graphics & marketing